The Pixel2AC line of boards allow you to drive dimmable high voltage AC outputs, from a WS2811 pixel line. The board itself is powered by the 5V, 12V or 24V power in your existing pixel wiring.


No external configuration is needed, this board is PLUG & PLAY!


The mounting holes on the board are suitable for CG-1500 enclosures.


This board features 1 AC input, and 9 AC outputs. The board can also be placed "in line" in a pixel string, as it will output WS2811 data as well. Not only that, but DMX output is also included. So you can easily hook up your stage lighting effects straight to this board, with no additional configuration necessary.


Board Specifications


Board Type Pixel2AC/AC9
Input Pixel Type Any WS2811 Pixel
Input Pixel Voltages 5V, 12V or 24V
Output Data Types WS2811 & DMX
# of DMX Channels Output 480
AC Voltage 110V-120V @ 60hz
# of AC Inputs 1
# of AC Outputs 9
# of Pixels/Nodes Consumed 3
# of Channels Consumed 9
Board Max Amps / Fuse Size 10A max per board
Output Max Amps 5A max per output

Pixel2AC [9 AC Outputs]

  • The higher the amperage you drive your board, the hotter it will get. This board ships without heat sinks, therefor it is your responsibility to monitor and control temperature based on the operating load you plan to use. Enclosure fans, heat sinks and other cooling methods will be necessary as you approach the maximum ratings of the board.

    DANGER: This is a high voltage board, and can cause serious injury or death. DO NOT USE this board if you are not comfortable working safely with high voltage.

  • xLights, Light O Rama, Vixen, Falcon, San Devices, AlphaPix, Minleon, EasyLights, since this board reads WS2811 pixel data, you can use any controller or sequencer you currently use to drive pixels. As long as you have pixel data, this board will function "plug & play".