The Pixel2DC line of boards allow you to drive dimmable DC outputs as well as Servos from a WS2811 pixel line. The board itself is powered by the 5V, 12V or 24V power in your existing pixel wiring.


No external configuration is needed, this board is PLUG & PLAY!


The mounting holes on the board are suitable for CG-1500 enclosures.


This board features 1 DC input, and 9 DC outputs + 1 Servo Power input, and 6 Servo outputs. It also has a switch to choose between a 5V servo signal, and a 6V servo signal. The board can also be placed "in line" in a pixel string, as it will output WS2811 data as well. Not only that, but DMX output is also included. So you can easily hook up your stage lighting effects straight to this board, with no additional configuration necessary.


Board Specifications


Board Type Pixel2DC/DC9S6
Input Pixel Type Any WS2811 Pixel
Input Pixel Voltages 5V, 12V or 24V
Output Data Types WS2811 & DMX
# of DMX Channels Output 480
DC Voltage 5V - 30V
# of DC Inputs 1
# of DC Outputs 9
Supported Servo Types 50hz Frequency
1ms - 2ms Pulse Width
5V or 6V Signal
5V - 36V Servo Power
# of Servo Power Inputs 1
# of Servo Outputs 6
# of Pixels/Nodes Consumed 5
# of Channels Consumed 15
Board Max Amps / Fuse Size 10A max per board
Output Max Amps 5A max per output

Pixel2DC [9 DC, 6 Servo Outputs]

  • The higher the amperage you drive your board, the hotter it will get. This board ships without heat sinks, therefor it is your responsibility to monitor and control temperature based on the operating load you plan to use. Enclosure fans, heat sinks and other cooling methods will be necessary as you approach the maximum ratings of the board.

  • xLights, Light O Rama, Vixen, Falcon, San Devices, AlphaPix, Minleon, EasyLights, since this board reads WS2811 pixel data, you can use any controller or sequencer you currently use to drive pixels. As long as you have pixel data, this board will function "plug & play".